IO-dry basic - Ideal for Foot Treatment
The IO Dry basic inontophoresis machine for treatment of hyperhidrosis (excessive sweating).
The classical continuous IO-Dry basic has the strongest effect through 100% current supply and therefore it is preferred for foot therapy.
The set includes:
- Inontophoresis device MEDlight io-dry basic
- Mains adpater
- suitcase (divisible in two treatment pans)
- connecting cable
- safety-wall chart
- instruction manual
The IO Dry basic inontophoresis machine is packed in a portable plastic carry case, which opens out to provide the two trays which are filled with up to 13 mm (1/2) or normal tap water to prepare for treatment of hyperhidrosis (excessive sweating).
The controller is connected via a small transformer pack to the domestic electricity supply (240V 50 Hz AC), and for the treatment of hands or feet or hands and feet together, a metal plate is put under the water in each tray with a gauze sheet over each metal plate, and two cables (one plus, one minus) are connected to the two metal plates.
The system is now ready for treatment, and for hands only, a hand is put in each tray in the water, a towel or tissue is kept nearby to soak up the water drips, and either the user or the helper turns on the machine, and turns up the current (in milliamps) to a comfortable tingling sensation which the machine automatically times for 15 minutes.
For feet only, the trays are put on the ground, the feet in each tray ion the water, and the controller operated in the lap.
For feet and hands together, one tray is used one a table (rotated 90o) for the hands, and the other tray on the ground for the feet until the controller operated by the user or the helper next to the hard tray.
For armpits, the trays are not used, but instead the cables are attached to a pan of electrodes covered by sponges soaked in water. The sponges are placed under the arms as show in the illustration and the controller is again generated in the lap of the user to turn up the millamps of current to a tolerable level.
- Metal implants in the body near to the treatment area i.e. non in hands for hand treatment, non in feet for feet treatment, and non in the trunk or arms for armpit treatment.
- Deep vein thrombosis, or takers of anti-coagulants for blood thinning.
- No rings or jewellery near the treatment area
- No metal bra inserts for armpit treatments
- NOTE: The polarity is changed over after each treatment, and back again for the next treatment
CE 0123 WEEE-Reg No. DE 14312030
Dimensions Carry Case. L x W x H 290 x 390 x 110 mm (11.5 x 15.5 x 4.5)
Dimensions Controller. L x W x H 210 x 120 x 70 mm (8.25 x 4.75 x 2.75)
NOTE: The IO Dry basic machines are designed with modern safety electronic circuits which allow the hands and feet to be taken in and out of the water without any current surges or small shocks due to safety ramping up and down of the milliamps of current, and therefore a user can operate an IO-dry basic machine alone.
Please see technical data by clicking on the PDF above